This International Metals Specifications Cross-Reference database compares the World's ferrous and nonferrous metal alloys as classified in the 58 systems of 36 countries. The equivalency of materials in the cross-reference was determined by comparing the chemical compositions associated with each of the 100,000+ designations. Although the database places an emphasis on the Unified Numbering System (UNS) for correlation, chemistry is the only valid measure of the equivalence or near equivalence of a metal or metal alloy. Nonetheless, when results are obtained from the database, they are for definition and comparative purposes only, and should not be used or relied upon for material specification or design.
INSTRUCTIONS: To use this database, enter a material designation in one system, and select the country you want for the equivalent result. For example, if you have the German DIN specification 1.4301 and want to know the equivalent material in the U.S., enter 1.4301 in the "Enter Specification here" box and then select the country from the drop down list in the "Select Country for result" box and click on "Search." If there is a correlation in the database, it will return those results.
NOTE: Not all agencies have issued a specification for the chemistry of every metal or metal alloy recorded in the database. If you encounter “No Results” while using the database, that means that a valid cross-reference is not available within the database, based upon chemical equivalence or near chemical equivalence, or that the country selected in the search has not issued a specification for a metal or metal alloy that chemically correlates to the specification entered in the search.
The data contained in the database have been compiled from a variety of sources for reference purposes only. You are responsible for referring to the published standards before taking or refraining from taking any action on the basis of any result obtained from the database. The standards for metal and metal alloys contained in the database are available from their respective standards organizations or issuing agencies and are the definitive document to be relied upon for specifying, purchasing or working materials. Therefore, www.steelforge.com, All Metals & Forge LLC, and its owners shall be held harmless from any and all liability for loss or damage arising from any inaccuracy or omission in the information obtained through the database related to the chemical properties of any metal or metal alloy or cross-reference from any one metal or metal alloy or specification from one country to any other metal or metal alloy or specification to another country.
The following chart contains the countries and the standards acronyms generally in use in those countries.
|Australia||ADC, AS||Netherlands (Holland)||NEN|
|Canada||Alcan, CSA||PRC (China)||GB, YB|
|France||AFNOR, AIR, NF||Switzerland||VSM|
|Germany, Dem R.||TGL||Turkey||TS|
|Germany, Fed R.||DIN, Stoff Nr||United Kingdom||B.S., BS-L, DTD|
|Hungary||MSZ||USA Government||DoD, FEDERAL,|
|International||ISO||USA Society||AA, AISI, AMS, ASME,|
|Israel||SI||ASTM, AWS, CDA, SAE|
|AA||Aluminum Association (USA)||FEDERAL||USA Government|
|AISI||American Iron and Steel||JUS||Yugoslavia|
|Institute (USA)||MILITARY||USA Government|
|Specifications (USA)||NBN||Belgium, Luxembourg|
|ASME||American Society of||NF||France|
|Mechanical Engineers (USA)||NS||Norway|
|ASTM||American Society for Testing||ONORM||Austria|
|and Materials (USA)||PN||Poland|
|AWS||American Welding Society||SABS||South Africa|
|(USA)||SAE||Society of Automotive|
To Send a Request for Quote, please Click Here, call 973.276.5000, or fax (973) 276 - 5050
Looking Ahead to Metals 2015
For CEO's, Purchasing Agents, Engineers, Machine Shops, OEMs, Business Owners ...
ISM's Purchasing Managers Report posted 10:00 AM ET May 1, 2013 PMI is 50.7%. New orders registered 52.3%
Search for a metal alloy, or other information